Amps
[Top] [All Lists]

Re: [Amps] Silver Strap

To: "'Harold Mandel'" <hmandel@barantelecom.com>, "'Steve Thompson'" <g8gsq@eltac.co.uk>, <amps@contesting.com>
Subject: Re: [Amps] Silver Strap
From: "Alex" <alexeban@gmail.com>
Date: Fri, 11 Jul 2008 21:59:55 +0300
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I am a little afraid of it. In my experience, this is good for a chassis
work, but not for lines carrying RF.
Alex    4Z5KS

-----Original Message-----
From: Harold Mandel [mailto:hmandel@barantelecom.com] 
Sent: Friday, July 11, 2008 1:36 PM
To: Alex; Steve Thompson; amps@contesting.com
Subject: RE: [Amps] Silver Strap

 It seems the preponderance of thinking is it
would be nice to do something rather than nothing,
as corroded copper and brass is unsightly,
while tarnished silver is less repulsive.

There is another choice: Iridium, Mil-Spec
Type-III conductive coating.

This is a very inexpensive plating process, and
we all see high quality electronics chassis works
with that familiar yellow finish.

Most every metal finisher/plater can do Iridium,
and the Mil-Spec upgrade just means a repetitive
coating process.

Hal
W4HBM
No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.138 / Virus Database: 270.4.7/1545 - Release Date: 10/07/2008
18:43

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>