Hi Scott,
If they'll fit physically, that might be a good spot for a pair of "surplus"
microwave oven transformers.
Pull the shunts and run the primaries in series to lower the operating flux,
lift the grounds from the secondaries and series them with a bridge rectifier.
Just a thought!
73 & Good morning,
Marv WC6W
http://wc6w.50webs.com/
--- On Sun, 8/24/08, Scott McGrath <mcgrath@fas.harvard.edu> wrote:
> From: Scott McGrath <mcgrath@fas.harvard.edu>
> Subject: [Amps] Anyone have a plate transformer suitable for a Gonset GSB-101
> To: "amps" <amps@contesting.com>
> Date: Sunday, August 24, 2008, 12:57 PM
> Hi,
>
> Any one have a plate transformer lying around with the
> following specs
>
> Primary 110V
>
> 1800-2200 VCT @ 600-800MA
>
> Found a nice but partially stripped Gonset GSB-101 amp at
> local hamfest
>
> - Thanks Scott
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|