>
> I am trying to make some new meter scales using the trial version of the
> Tonne software called "Meter". I am trying to make a center zero scale.
> What I want is 100ma - 0 - 100ma. I can't find on the Tonne software where
> this can be done. It makes the zero on the left end of the scale only. Am
> I missing something? Can someone direct me to free software that can do
> this?
>
When I made some meter scales a few years back, I simply scanned the old meter
scale using a flatbed scanner, and modified the calibration lettering using
Photoshop, but any image editing software should do.
I then printed the new meter scales on "Avery" self adhesive labels and stuck
on the reverse of the old meter scale.
Why the reverse - in case I wanted to reuse the meter with the old scale as
I was concerned if the adhesive may damage the original printing.
Regards
David G4FTC
_________________________________________________________________
Live Search presents Big Snap II - win John Lewis vouchers
http://clk.atdmt.com/UKM/go/117442309/direct/01/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|