Amps
[Top] [All Lists]

Re: [Amps] rx noise?

To: K1TTT <K1TTT@ARRL.NET>
Subject: Re: [Amps] rx noise?
From: n8de@thepoint.net
Date: Sat, 06 Dec 2008 12:24:57 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Dave,
Sounds like a leaky power supply capacitor.  Might be a cold solder  
joint in the capacitor chain.
Good luck
Don
N8DE

Quoting K1TTT <K1TTT@ARRL.NET>:

> I have a commander hf-2500 (pair of 3cx800a7's, no qsk) that seems to be
> working fine.  However, during cqww cw last week I had to pull it off the
> 20m station because it was making a broadband noise while on receive.  I put
> it back on the station today and it isn't doing it now.  I tried warming it
> up a bit and it still didn't do it....though its obviously not as warmed
> through as after 40 or so hours of cqww.  The only other thing I noticed is
> when it was doing it the plate voltage dropped a bit, maybe 50-100v, but I'm
> not sure if that was a cause or effect since the line voltage sag from the
> other stations can make the hv sag a bit here.  Any ideas where to start
> looking??
>
>
> David Robbins K1TTT
> e-mail: mailto:k1ttt@arrl.net
> web: http://www.k1ttt.net
> AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>