Hi Jeff:
The SB-220 was never designed to generate 1.5 KW output. Running 1.5 KW with
the SB-220 will surely shorten the life of several components!
The SB-220 was designed to run 1 KW INPUT on CW and 2 KW PEP input on SSB.
Which was about 600 watts output for CW.
It would take 70 to 100 watts to drive the SB-220 to its designed input
power rating.
73,
Tim K3LR
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Jeff Carter
Sent: Thursday, January 22, 2009 4:50 PM
To: amps@contesting.com
Subject: [Amps] SB-220 Drive Levels
Can anyone tell me how much drive the SB-220 needs to make 1.5KW?
I've seen several references that 100W isn't enough drive for this
amp. How much would it take?
Jeff/KD4RBG
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|