Does he have ALC hooked up?
----- Original Message -----
From: "Rick Stealey" <rstealey@hotmail.com>
To: <amps@contesting.com>
Sent: Tuesday, January 27, 2009 6:30 AM
Subject: [Amps] Slow keying issue
>
> The responses so far don't really mesh with the evidence Bob, NX5M
> presented:
>
>> Although the relay was closing instantly the power output of the amp was
> not really kicking in until after the first or second letter of my call
> was sent.
>
> He says the relay (presumably in the PA) is closing instantly. Tony, K1KP
> presents a solution that seems to be appropriate for speeding up relay
> switching for cw keying speeds, something usually deployed to get relays
> to switch in the 5-20 ms timeframe. But Bob says his rf is delayed so
> much that he can see the 60 watt driver power on a wattmeter, which to
> me seems to indicate his delay is MUCH longer than 20 ms.
>
> Bob, could it be that your relay contacts in the amp are contaminated?
> Would it be convenient to get in there and run some paper over the
> contacts,
> coated with alchohol or DeOxit?
>
> Rick K2XT
>
> _________________________________________________________________
> Windows Live™ Hotmail®…more than just e-mail.
> http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_hm_justgotbetter_howitworks_012009
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.176 / Virus Database: 270.10.13/1912 - Release Date: 1/23/2009
6:54 PM
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|