Using a toroid wound with as many turns as I could get on the power cord did
not solve my problem. Neither did installing a toroid on the remote cable.
The .01 cap completely fixed the problem. I explained this 2 days ago on
this reflector. Why doesn't the originator just climb up on a step ladder
and spend 2 minutes loosening 2 screws and put the &#@#! cap across the
terminal?
Bob W6TR
----- Original Message -----
From: "Jim Brown" <jim@audiosystemsgroup.com>
To: "AMPS" <amps@contesting.com>
Sent: Thursday, February 05, 2009 7:28 PM
Subject: Re: [Amps] Genie Opener
> On Thu, 5 Feb 2009 08:01:37 -0500, Francis Sanita wrote:
>
>>ferrite beads,
>
> NOT ferrite beads. A multi-turn choke wound on a toroid. But try the
> capacitor first.
>
> 73,
>
> Jim K9YC
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|