Thanks Eddy, I will take a look at those years. It may be from there it does
have a hand wound plate choke.
73,Bob kc0hfl
----- Original Message -----
From: "Edward Swynar" <gswynar@durham.net>
To: "Robert Perdue" <kc0hfl@cox.net>; <Amps@contesting.com>
Sent: Monday, March 02, 2009 6:09 AM
Subject: Re: [Amps] 833A
> Hi Bob,
>
> The ARRL HANDBOOK for 1979(?) / 1980(?) featured a low-band amplifier
> designed around the 833A...even has a HB RF plate choke!
>
> ~73~ Eddy VE3CUI - VE3XZ
>
>
> ************************************
>
> ----- Original Message -----
> From: "Robert Perdue" <kc0hfl@cox.net>
> To: <Amps@contesting.com>
> Sent: Monday, March 02, 2009 1:18 AM
> Subject: [Amps] 833A
>
>
>> I acquired an 833A RF deck it is a 40/80M deck the only markings that may
> refer to the design is P.J. 2000 on the front panel. Info is a little
> scarce
> on this tube as far as rf amps go any ideas of what and when it may have
> appeared in a handbook or a QST? I would like to at least try it looks
> cool
> grounded grid thru a 55 ohm 100w resistor.
>>
>>
>> Bob,kc0hfl
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|