I would be interested in seeing that article. I looked in my 1978 handbook
and it's not there.
Bob W6TR
----- Original Message -----
From: "Robert Perdue" <kc0hfl@cox.net>
To: "Edward Swynar" <gswynar@durham.net>; <Amps@contesting.com>
Sent: Monday, March 02, 2009 2:55 PM
Subject: Re: [Amps] 833A
> Thanks Eddy, I will take a look at those years. It may be from there it
> does
> have a hand wound plate choke.
>
> 73,Bob kc0hfl
> ----- Original Message -----
> From: "Edward Swynar" <gswynar@durham.net>
> To: "Robert Perdue" <kc0hfl@cox.net>; <Amps@contesting.com>
> Sent: Monday, March 02, 2009 6:09 AM
> Subject: Re: [Amps] 833A
>
>
>> Hi Bob,
>>
>> The ARRL HANDBOOK for 1979(?) / 1980(?) featured a low-band amplifier
>> designed around the 833A...even has a HB RF plate choke!
>>
>> ~73~ Eddy VE3CUI - VE3XZ
>>
>>
>> ************************************
>>
>> ----- Original Message -----
>> From: "Robert Perdue" <kc0hfl@cox.net>
>> To: <Amps@contesting.com>
>> Sent: Monday, March 02, 2009 1:18 AM
>> Subject: [Amps] 833A
>>
>>
>>> I acquired an 833A RF deck it is a 40/80M deck the only markings that
>>> may
>> refer to the design is P.J. 2000 on the front panel. Info is a little
>> scarce
>> on this tube as far as rf amps go any ideas of what and when it may have
>> appeared in a handbook or a QST? I would like to at least try it looks
>> cool
>> grounded grid thru a 55 ohm 100w resistor.
>>>
>>>
>>> Bob,kc0hfl
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|