I use one AL-1500 and two AL-1200's. Had them for about 5 years. No relay
problems...........yet.
The only repair has been to replace the filter caps on the AL-1500.
73,
Ken W2DTC
> Ameritron uses a step-start circuit in the AL1200 and 1500 which uses a
> relay to short out a 10 ohm series resistor in the transformer primary to
> limit current inrush. The relay in question is rated 15 Amp resistive. I
> found mine to be welded closed. Seems like too low a value to me. Is this
> a
> common failure in these amps?
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|