Amps
[Top] [All Lists]

[Amps] Switch needed for Amp Supply LK series amp

To: <amps@contesting.com>
Subject: [Amps] Switch needed for Amp Supply LK series amp
From: "Carl" <km1h@jeremy.mv.com>
Date: Thu, 12 Mar 2009 12:06:29 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I need a SPDT Snap-In rocker switch that appears to be used across all 
LK amps in one place or another as either HV/Grid or Transmit/Standby.

Color not important as long as it fits a .43" W x 1.2" H opening (10.9 x 
30.4mm).

Ive ordered from both Mouser and Digi Key and both initially did not 
have an ITT/Cannon clone in stock but sent me a cross reference 
substitute. Neither one is even close to fitting!

The original is a Swann Series 44 and is also marked OAK. They seem to 
be located in Australia and Singapore and with no US distributor that I 
can find. Oak is long gone.

Haalp!

Carl
KM1H


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>