That switch may work but I dont need an amp attached to it <G>
Carl
KM1H
----- Original Message -----
From: <n8de@thepoint.net>
To: "Carl" <km1h@jeremy.mv.com>
Cc: <amps@contesting.com>
Sent: Thursday, March 12, 2009 12:14 PM
Subject: Re: [Amps] Switch needed for Amp Supply LK series amp
Might it be the same as the rocker switches used on the Dentron amps?
I have a Clipperton-L with NO transformer that might be worth having
for parts.
Not sure about the size of the rocker switches.
Don
N8DE
Quoting Carl <km1h@jeremy.mv.com>:
> I need a SPDT Snap-In rocker switch that appears to be used across all
> LK amps in one place or another as either HV/Grid or Transmit/Standby.
>
> Color not important as long as it fits a .43" W x 1.2" H opening (10.9
> x
> 30.4mm).
>
> Ive ordered from both Mouser and Digi Key and both initially did not
> have an ITT/Cannon clone in stock but sent me a cross reference
> substitute. Neither one is even close to fitting!
>
> The original is a Swann Series 44 and is also marked OAK. They seem to
> be located in Australia and Singapore and with no US distributor that
> I
> can find. Oak is long gone.
>
> Haalp!
>
> Carl
> KM1H
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|