Amps
[Top] [All Lists]

Re: [Amps] YOKOGAWA Medical Amplifier

To: "'David Craig'" <davidhcraig@verizon.net>, <amps@contesting.com>
Subject: Re: [Amps] YOKOGAWA Medical Amplifier
From: "Rex Lint" <rex@lint.mv.com>
Date: Wed, 25 Mar 2009 11:19:49 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
You might talk to Steve, G3TPW.  See
http://www.g3tpw.co.uk/Page8EvenMoreFAQs.html.


      -Rex-
 
     K1HI
       Rex Lint
       Merrimack, NH 

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of David Craig
Sent: Tuesday, March 24, 2009 5:02 PM
To: amps@contesting.com
Subject: Re: [Amps] YOKOGAWA Medical Amplifier

    Wish I could provide specifics but can't.  That said, I had a similar 
issue with an Aerotron Amp that used a pair of 3-400s.  To this day I have 
not even found a reference to one anywhere... In sum I'd just proffer the 
following- like my military surplus amp, it is almost certainly 
over-engineered.  Since you are making a monoband 6m tank you can ignore 
that side of things.  Concentrate on the PS- trace it out & diagram it.  It 
seems like a PITA but is isn't bad.  In my case, about 6 careful hours later

I had the supply up and running perfectly.  It sits in the shop waiting a 
tank circuit.  GL- Dave N3DB


----- Original Message ----- 
From: "Rex Lint" <rex@lint.mv.com>
To: "'RICHARD SOLOMON'" <w1ksz@q.com>; "'Amps'" <amps@contesting.com>
Sent: Tuesday, March 24, 2009 3:42 PM
Subject: Re: [Amps] YOKOGAWA Medical Amplifier


> Check the archives!
>
> http://lists.contesting.com/archives//html/Amps/2008-05/msg00021.html
> http://lists.contesting.com/archives//html/Amps/2008-03/msg00020.html
>      -Rex-
>
>     K1HI
> Rex Lint
>   Merrimack, NH
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of RICHARD SOLOMON
> Sent: Monday, March 23, 2009 1:11 AM
> To: Amplifier Reflector
> Subject: [Amps] YOKOGAWA Medical Amplifier
>
>
> I have a chance to pick up one of these, it has two 3-500Z's in it.
> The Model Number is  9306UL. I would like to put it on 6 Meters.
>
> Has anyone had any experience with one of these ? Does anyone
> have any info on it ?
>
> Thanks, Dick, W1KSZ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> 


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>