Re: [Amps] tank calculations - MFJ analizer - resistor

[Vic K2VCO <vic@rakefet.com>]

chuck wrote:
>  
> 
> 
> 
> ok, quick question...(it'll be a poll)
>  
> DO I leave the tube connected to the tank circuit and put on a 1/2w resistor
> or disconnect the tube from the tank to do
> the sweeps for tuning calculations

Leave the tube in (no plate voltage, of course). Otherwise the output capacity, 
which 
becomes part of the tune c, isn't there.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps