ORIGINAL MESSAGE:
On Thu, 11 Jun 2009 18:33:29 -0400, "ka1mwp" <ka1mwp@comcast.net>
wrote:
>The current drops from 20 or so ma down thru 12 with the voltages and
>output watts staying pretty close to values.
REPLY:
Every amplifier I have ever owned has exhibited current drift similar
to what you have seen. When you apply power, literally everything in
there starts heating up and heat causes expansion. It happens within
the tube, the tank circuit, everything. What you are seeing is just
the net result of it all. I wouldn't worry about it.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|