Transformers are rated for input power. In order to obtain best linearity
the tube efficiency is rather poor.
Carl
KM1H
----- Original Message -----
From: "Russ Williams" <hrd998cc@yahoo.com>
To: <amps@contesting.com>; <jtml@vla.com>
Sent: Friday, July 24, 2009 12:32 PM
Subject: Re: [Amps] RF 103A plate transformer
I will guess that anything made by Harris is very conservatively rated. I
think the Harris RF-110 amplifier is only rated at a kilowatt pep output; it
uses a pair of 4CX1500's for finals!
Russ
KW6T
> From: John Lyles <jtml@losalamos.com>
> Subject: [Amps] RF 103A plate transformer
> To: amps@contesting.com
> Date: Friday, July 24, 2009, 8:24 AM
> Since that amplifier uses a
> conventional choke input filter for the HV
> power supply, and the DC voltage is marked as 3300 VDC on
> the schematic,
> one would assume that the transformer RMS rating is 3500V
> output, not 3
> kV. I am not certain of the 1.5 Amp rating however, as the
> amplifier is
> only rated for 1 kW PEP output.
>
> 73
> John
> K5PRO
>
>
> > Message: 1
> > Date: Wed, 22 Jul 2009 21:06:36 -1000
> > From: "Roland AH6RR" <Toesonnose@hawaii.rr.com>
> > Subject: [Amps] Harris Plate Transformer Rating
> > To: <amps@contesting.com>
> > Message-ID:
> <0A27E2846F3B425BAC9EFD6BAF95D96A@DESK>
> > Content-Type: text/plain;
> charset="iso-8859-1"
> >
> > Aloha All,
> > I have just aquired a Harris plate transformer from a
> RF-103 amp. Does anyone know the rating of this transformer?
> Is it 3500V @ 1.5 amps? or 3000V @ 1.5 amps. I am going to
> use this transformer as a start of a GS-35B amp.
> >
> > Thanks
> > Roland AH6RR
> >
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|