I placed mine in a box configuration, and tied all the individual socket
pins together with copper strap and then to a central ground point in the
middle. Its fully stable on all bands at 2900V key down.
Carl
KM1H
----- Original Message -----
From: "jonathan white" <jonathan.white20@btinternet.com>
To: <amps@contesting.com>
Sent: Monday, July 27, 2009 7:36 AM
Subject: [Amps] grounded grid 813 x4
> Hi.
> This has probable been asked before on this group,but... Is it good
> practice to physically tie the grids to ground via one connection,or via
> low value resistors and decoupling capacitors. I was going to go for VHF
> practice and go for direct grounding,but would like some comments before
> progressing this project.
> 73`s Jon
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|