RE: > >Hi.
> >This has probable been asked before on this group,but... Is it good
> >practice to physically tie the grids to ground via one connection,or via
> >low value resistors and decoupling capacitors. I was going to go for VHF
> >practice and go for direct grounding,but would like some comments before
> >progressing this project.
> > 73`s Jon
REPLY:
I'm curious - what would be the reason for using resistors and
decoupling caps?
73, Bill W6WRT
===========================
Herzog proffers a reason, to be able to measure the grid current.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|