Amps
[Top] [All Lists]

Re: [Amps] Dummy Load "Oil"

To: RICHARD SOLOMON <w1ksz@q.com>
Subject: Re: [Amps] Dummy Load "Oil"
From: Scott McGrath <mcgrath@fas.harvard.edu>
Date: Wed, 29 Jul 2009 11:34:13 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Everything else is flammable with the possible exception of propylene 
glycol which is used for filling projection TV tubes but it is also 
expensive and I'm not sure of the dielectric properties - you could 
perhaps send it to bird for re-filling which would probably be cheaper 
and they would replace the seals and check for leaks at the same time.

Scott N1JIN

RICHARD SOLOMON wrote:
> Since the Bird Silicone Oil is a tad pricey ($142/gal), can anyone
>
> recommend a substitute for re-filling a Bird Dummy Load ?
>
>  
>
> Thanks, Dick, W1KSZ
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>   

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>