Amps
[Top] [All Lists]

Re: [Amps] grounding grids

To: "Jack Shirley" <jcshirle@gmail.com>, <amps@contesting.com>
Subject: Re: [Amps] grounding grids
From: "Jeff Blaine AC0C" <keepwalking188@yahoo.com>
Date: Thu, 30 Jul 2009 21:11:09 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Great idea Jack.

73/jeff/ac0c

--------------------------------------------------
From: "Jack Shirley" <jcshirle@gmail.com>
Sent: Thursday, July 30, 2009 6:25 PM
To: <amps@contesting.com>
Subject: Re: [Amps] grounding grids

> I looked at the various 3-400 and 3-500 circuits in the Eimac Amateur
> Service Newsletters and did not find this mentioned anywhere.
>
> If the SB-220 and L4 use the same grid circuit, I could ask the engineer 
> who
> designed the Drake L-4 as I know him personally.  Any interest?
>
> 73  Jack N8DX
> On Thu, Jul 30, 2009 at 6:48 PM, Ward Silver <hwardsil@gmail.com> wrote:
>
>> > perhaps somebody with an SB-220 and a spectrum analyzer needs to do
>> > an IMD profile using each grid circuit and SEE which one produces the
>> > cleaner
>> > output.
>>
>> What?!  And ruin a perfectly good thread?
>>
>> 73, Ward N0AX
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>