Amps
[Top] [All Lists]

Re: [Amps] spray painting metal

To: Carl <km1h@jeremy.mv.com>
Subject: Re: [Amps] spray painting metal
From: Vic K2VCO <vic@rakefet.com>
Date: Fri, 31 Jul 2009 08:06:56 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Carl wrote:
 > Also keep the nozzle the same distance from the work throughout the pass.

Another spray can tip: they tell you to shake it for a minute after the 
agitator ball is 
free. That's not enough! Five minutes is better.

It's also helpful to warm it it bit in some warm water first, unless you live 
where I do 
and it's summer. Don't go overboard on this (that is, don't use a torch and 
then sue me 
after it explodes -- I'll claim the Darwin Defense).
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>