Amps
[Top] [All Lists]

Re: [Amps] Loaded output circuits

To: <amps@contesting.com>
Subject: Re: [Amps] Loaded output circuits
From: "Bill, W6WRT" <dezrat1242@yahoo.com>
Reply-to: dezrat1242@yahoo.com
Date: Mon, 31 Aug 2009 08:49:57 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
ORIGINAL MESSAGE:

On Mon, 31 Aug 2009 01:20:34 -0400, "Joe Subich, W4TV" <lists@subich.com> wrote:

>
>Bill, stop changing the question to suit your point of view. 
>The original question was about operating at the lower output 
>power level with the higher plate voltage.  The only person 
>who ever said anything about not properly tuning the amplifier 
>for the operating power level was you.  

REPLY:

Oh please, Joe. It was your answer to the original question that triggered the
whole thread:

W4TV:  "Running an amplifier in a mis-tuned condition (tune for 1500 W Output
and drive to 800 W Out) is hazardous and inefficient. ".

I agreed about being inefficient but challenged you on the "hazardous".

Remember?

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>