Paul Decker wrote:
>
> Would I just put this to the heater pins?
Between ONE of the filament pins and the grid! Across the filament would of
course destroy it.
My experience with these tubes has been that it's common to see a short that
develops only
after the filament warms up. In this case, you wouldn't be able to do this with
a cold tube.
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|