Sorry, let me be more clear. The relay takes 2 long to reingage after I
quit sending, therefore I miss the first letter from someone is quick to
respond. It happened quite a few tms so I assume they just didn't call to
quick.
Thanks in advance.
Mike
KK9V
On Sat, Nov 21, 2009 at 4:34 PM, Roger Parsons <ve3zi@yahoo.com> wrote:
> K1KP wrote:
>
> ...Quite often the cause of the 'missing first dit' is that the exciter is
> making RF before the amp has switched over to transmit. The exciter sees a
> high SWR, and on rigs such as the 765, folds back the output...
> ...a solid sate version of the PTT signal available on an output connector
> known as 'SEND'...
>
> Tony is quite correct.
>
> However, beware! The solid state PTT signal on the IC765 operates about 8ms
> before RF appears which is fine. Unfortunately, if the rig is used in full
> break-in mode, it de-operates (?!) about 8ms BEFORE RF disappears - which is
> disastrous!
>
> 73 Roger
> VE3ZI
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|