Amps
[Top] [All Lists]

Re: [Amps] TITAN II tuning and loading padder capacitors

To: Jim W7RY <w7ry@arrl.net>, amps@contesting.com
Subject: Re: [Amps] TITAN II tuning and loading padder capacitors
From: Radio WC6W <wc6w_amps@yahoo.com>
Date: Tue, 8 Dec 2009 09:54:36 -0800 (PST)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hi Jim,
  For the load side you might also consider some of the modern ceramic parts 
made by ATC, Temex or Murata.  

  The lower value parts are rated up to around 3KV and their current 
capabilties are impressive.

73 & Good morning,
  Marv WC6W 

http://wc6w.50webs.com


--- On Mon, 12/7/09, Jim W7RY <w7ry@arrl.net> wrote:

> From: Jim W7RY <w7ry@arrl.net>
> Subject: Re: [Amps] TITAN II tuning and loading padder capacitors
> To: "Carl" <km1h@jeremy.mv.com>, amps@contesting.com
> Date: Monday, December 7, 2009, 4:45 PM
> Where do you find those caps Carl?
> Thanks
> 73
> Jim W7RY
> 
> 


      
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>