The GSB-201 has three 80m positions I believe...
WB2WIK/6
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
Behalf Of Carl
Sent: Monday, December 14, 2009 1:34 PM
To: Bill K2OWR; amps@contesting.com
Subject: Re: [Amps] Gonset GSB201
Why 7 positions? How many are in use in a 80-10M pre WARC amp?
Carl
KM1H
----- Original Message -----
From: "Bill K2OWR" <k2owr@comcast.net>
To: <amps@contesting.com>
Sent: Monday, December 14, 2009 3:06 PM
Subject: [Amps] Gonset GSB201
>
>
> :::: I've had this thing for over 45 years, using it on and off. Sometimes
> "off" for ten years at a time.
> It's always been reliable, but not without it's problems.
> The untuned input is hated by modern solid state xcvrs; the 110 volt AC
> only makes the lights dim and reduces output; and the bandswitch has long
> ago given up on ten meters, and now arcing over on some others.
>
> I will absolutely buy a new(er) amp, but until then, I'd love to get this
> old boat anchor healthy again.
>
> The Bandswitch seems to be the only thing impossible to find.
> Anyone got a good source for this thing....I'm not afraid of "fudging" one
> that's close, but if I'm going to do it, I'd like a more rugged one. It's
> listed in the schematic as a 7 position wafer switch.
> It seems to be a fairly simple 7 position, 2 wafer ceramic switch.....but
> unquestionably too light duty.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|