Aloha All & Merry Christmas,
Well I rebuilt the HV filter cap bank with new caps and bleeder resistors
after the failure I had and I report the amp is doing fine now. There was a bad
bleeder resistor along with a bad filter cap so I replaced them all including
the metering resistors and the ALC resistor. I am happy to report the output is
1400+ on 80-20 and 1250 on 17-10. I just want to thank all who helped with it.
Merry Christmas and 73
Roland AH6RR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|