Hey Rich, surprise! Thailand lacks, Sears, S/K, and Snap-on. My
brother-in-law builds houses with a pair of pliers, a flat blade screwdriver,
and a hammer.
Still, I will try CockPit, the auto repair chain. 73,
Charles Harpole k4vud@hotmail.com
> From: rdj@wildblue.net
> To: amps@contesting.com
> Date: Mon, 11 Jan 2010 16:09:49 -0600
> Subject: [Amps] 9mm Allen
>
> Several places carry a 9mm 3/8 drive socket, Sears , S/K , mine is a
> Snap-on, part #FAM9E. You can try your local auto parts store also.
>
> Rich ,KDØZZ ,
> from the middle of Missouri , out in the sticks with the hicks and the
> ticks.
>
>
>
> I have a serious need for a #9 Allen wrench or the English size just larger
> than 5/16"...
>
>
>
> I need to drain the Hub City brand worm gear box which is on the crank up
> mechanism of my US Tower 70 ft.
>
>
> As u may guess, a #10 is too big and I can not find a wrench smaller but
> larger than a #8.
>
>
>
> If you can get same for me, please mail to me at below and I will send you
> money to pay back immediately.
>
>
>
> A six or eight inch long wrench would be good, but I will take anything. If
> u send in a bubble envelop, likely ok, and mark outside "used parts."
>
>
>
> Help! HUGE THANKS, 73
>
>
>
> Charles Harpole
>
> P. O. Box 1, Nakhon Chaisi
>
> Nakhon Pathom 73120
>
> Thailand
>
>
>
>
>
>
> Charles Harpole k4vud@hotmail.com
>
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 11 Jan 2010 05:09:29 -0800 (PST)
> From: david sutton <sootydave@yahoo.com>
> Subject: Re: [Amps] Need #9 Allen wrench MUCHO
> To: Charles Harpole <k4vud@hotmail.com>, amps@contesting.com
> Message-ID: <126888.96749.qm@web31007.mail.mud.yahoo.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> Charles
> Have you tryed a hex bolt?with a few nuts tightend onto the thread? i have
> used this methade several times for those hard to find sizes.
> just a thought.
> 73's
> Dave kg4uxr
>
> ?
> Brits with a southern call? how strange, only when you hear the accent.
> see kg4uxr on :-
> www.qrz.com/callsign/kg4uxr
>
>
>
>
> ________________________________
> From: Charles Harpole <k4vud@hotmail.com>
> To: amps@contesting.com
> Sent: Mon, January 11, 2010 5:49:21 AM
> Subject: [Amps] Need #9 Allen wrench MUCHO
>
>
> I have a serious need for a #9 Allen wrench or the English size just larger
> than 5/16"...
>
>
>
> I need to drain the Hub City brand worm gear box which is on the crank up
> mechanism of my US Tower 70 ft.
>
>
> As u may guess, a #10 is too big and I can not find a wrench smaller but
> larger than a #8.
>
>
>
> If you can get same for me, please mail to me at below and I will send you
> money to pay back immediately.
>
>
>
> A six or eight inch long wrench would be good, but I will take anything.? If
> u send in a bubble envelop, likely ok, and mark outside "used parts."
>
>
>
> Help!? ? HUGE THANKS,? 73
>
>
>
> Charles Harpole
>
> P. O. Box 1, Nakhon Chaisi
>
> Nakhon Pathom? 73120
>
> Thailand
>
>
>
>
>
>
> Charles Harpole k4vud@hotmail.com
>
>
>
> ??? ??? ??? ? ??? ??? ?
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>
>
> ------------------------------
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> End of Amps Digest, Vol 85, Issue 13
> ************************************
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.432 / Virus Database: 270.14.133/2612 - Release Date: 01/11/10
> 13:29:00
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|