Gentlemen:
I have a very pleasant looking 2K Classic desktop in the shack for a bit, and I
am seeing a fairly high input SWR on all five bands. The low point is 20 meters
with 1.7 to 1, and the high point is 10 meters at 2.5 to one.
Of the few issues I have seen with the Classic Series of Henry amps through the
years, input SWR was never an issue.
I am hoping that readjusting the input coils or possibly a dirty/defective
input relay are my remedy.
I would appreciate input from folks who have conquered such an issue especially
on a Henry.
TIA Don N8ECH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|