Because it is offered as a kit, is the reason I
bought and put together my K3 which has every bell &
whistle except the inboard 2 meter board.
Gary
KA1J
BTW, Not thinking I "need" a 3KW ATU but if I could
make one from a kit as good as one of the better
ones, I'd probably do it.
> The Elecraft K-3 is an example of what kits have
become.
>
> Ten Tec also has a selection of less complicated ones.
>
> Down East Microwave has some rather elaborate ones for the VHF and up bands.
>
> Then there are the usual rinky dink QRP offerings.
>
> I could see a market for a 3000W+ ATU from one of the established outfits,
> with and without the sheetmetal. But dont expect a big savings as assembly
> labor is cheap in Ole Miss.
>
> Carl
> KM1H
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|