----- Original Message -----
From: "Bill, W6WRT" <dezrat1242@yahoo.com>
To: <amps@contesting.com>
Sent: Wednesday, March 17, 2010 3:53 PM
Subject: Re: [Amps] placement of RF choke bypass cap.
> ORIGINAL MESSAGE:
>
> On Wed, 17 Mar 2010 07:24:00 -0700, "Jim Thomson" <Jim.thom@telus.net>
> wrote:
>
>>## How do u know there will be RF flowing on the underside
>>of the chassis ?? ... asuming it has a ..'normal' chassis .
>>If the grid trip is below the chassis, and also uses rf bypass caps,
>>it should not be a problem. ... at least on paper.
>
> REPLY:
>
> The RF will be flowing through the thickness of the chassis, both
> sides. This is not a transmission line or piece of coax.
** Say what????
Carl
>
> And the problem with the grid trip or other circuit is not easily
> cured with bypass caps used in the ordinary way. The problem there is
> a ground loop condition, which acts like a little "RF generator",
> injecting RF into anything connected across part of the loop or from a
> point on the loop to a different ground. . It's best to just stay away
> from the loop entirely. And better yet to not create one that long in
> the first place.
>
> A certain amount of ground loop in the tank circuit is unavoidable if
> the tune and load caps are mounted to the chassis, but to create a
> second one 11 inches long is ridiculous.
>
> 73, Bill W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|