> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]
> On Behalf Of Bill, W6WRT
> Sent: Wednesday, March 24, 2010 8:49 PM
> To: amps@contesting.com
> Subject: Re: [Amps] placement of RF choke bypass cap.
>
> ORIGINAL MESSAGE:
>
> On Wed, 24 Mar 2010 17:24:21 -0400, "Gary Schafer"
> <garyschafer@comcast.net> wrote:
>
> >And no,
> >the current still doesn't flow thru the antenna disks as you would like
> to
> >believe.
>
> REPLY:
>
> "There is none so blind as he who will not see". Dunno who said that,
> but he was probably following this thread. :-)
>
> The two disk experiments prove what I said. To quote one of the
> experimenters "Bill is right".
>
> Believe what you want. I'm done.
>
> 73, Bill W6WRT
I see that you don't want to address the other questions asked of you
several times.
I and others have provided you with several examples of RF NOT flowing thru
a plate but you ignore those and hang on a convoluted argument that can't be
easily proven either way. Especially when you don't see all the parameters
involved.
If you want to know about the "disks on the antenna" story, search
rec.radio.amateur.antennas group. This was discussed at length a few years
ago there by some very knowledgeable fellows including W7EL, the author of
eznec.
73
Gary K4FMX
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|