Amps
[Top] [All Lists]

Re: [Amps] 'good engineering'

To: Jim Thomson <Jim.thom@telus.net>
Subject: Re: [Amps] 'good engineering'
From: James Colville <jimw7ry@gmail.com>
Date: Sat, 27 Mar 2010 08:10:41 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Oh please...

Jim W7RY



On Sat, Mar 27, 2010 at 3:47 AM, Jim Thomson <Jim.thom@telus.net> wrote:

> Date: Fri, 26 Mar 2010 10:36:26 -0700
> From: "Bill, W6WRT" <dezrat1242@yahoo.com>
> Subject: Re: [Amps] 'Good engineering'
>
> :
>
> On Fri, 26 Mar 2010 07:01:34 -0700, "Jim Thomson" <Jim.thom@telus.net>
> wrote:
>
> >
> >##  That's funny.  The fellow at AES tells me the big slugs
> >for the BIRD/CD  line sections were literally flying off the
> >shelves that week  I ordered 5 x of em.  [ mine were small to big]
> >There was a big contest coming up apparently.
>
> REPLY:
>
> Jim has been a scofflaw forever, at least for the couple of years I
> have been reading his illegal-amp drivel on various reflectors.
>
> ## I'm on AMPS.. and  the yahoo ham_amps... and that's it. You say
> you have built 5 x amps.. why not post the pix on ham_amps... like
> I did?  I posted 150+  pix on there.  Where's  yours ?
>
>
>
>  He always points to bad behavior by others as justification for his own.
>
> ## never have Bill.  I don't have to justify anything, to anybody.
> I call it as I  see it.  I'm no BS artist either.  Remember that argument
> about how a simple tuned input works, and how, without one,  the return
> current is via the coax shield going back to the xcvr, then up through the
> load cap of xcvr.. and back down center conductor, back to cathode. You
> still  don't believe it, even after  Tony King posted the Orr classic
> diagram
> on the other reflector.  I bet you $1000.00  CASH, that's  how it
> works.IOW,
> put up or shut up. You vanish into thin air for a while... and come over to
> AMPS.
> Now ur spewing BS, about how RF  bores right through solid 1/8" AL.
>
>
>
>
> Fortunately his ilk is rare in our hobby. Nearly all hams recognize
> the rationale for power limits and obey the rules. Jim thinks rules
> are for other people, not him.
>
> ##  Eimac tells  me that club stations in JApan are allowed 3.5 kw.
> In some former soviet union countries, the ham power limit depends on how
> much u pay for the annual fee. The max was a whopping 50 kw.
> 321 countries on the planet.... and all with different standards.
>
> Very few in the uk-zl-vk-zs  land obey their 400w  rule.  Nobody in Italy
> obeys their 300w  rule.   Would you ?
>
> ##  How  come  20 kw ERP is ok... with stacked yagi's  on big tower's ?
> Perhaps  the FCC  should make it  1.5 kw ERP.   Then low power for the
> fellows with big tower's.  Would that make you happy?    Or  why not just
> make it 20 kw ERP.... now that would make a lot of sense.
>
>
>
>
>
> He is a detriment to ham radio
>
> ##   for what .... promoting 7-16 Din's ?   Or for getting Ken at Cal-Av to
> custom
> build me  5 x 10 kw baluns, to my specs ?   I convinced Ken to make em a
> stock item,
> and the rest is history.  They sell  worldwide.  A $200.00  YC-156 makes
> more sense
> than $2400.00  for a pair of 8877's or 3CX-1200's.  IMO, the YC-156 is the
> 4-1000
> for the new millenium.
>
>
>
>  and I hope the Canadian authorities
> nail him to the wall one of these days.
>
> ##  for what... posting  step by step pix on how to build a
> YU-148 amp?   Or is it the 2 x GS35B 6m amp ?   Or perhaps
> the ant tuner, with the pair of swiss made vac caps and edge
> wound roller coil ?  Or maybe the 1 in, 9 out  remote ant switch?
>
>
>
> ##  Just for the record,  I had my ham license suspended  for 2 x weeks
> back in 1977.. over RFI/TVI.      I had my license suspended   for 6 x
> months
> about 5 yrs ago. If I'm not at the top of their bad boy list, I'm 2nd from
> the top.
> The 2nd suspension was over ant's.   City hall hates ham radio in this
> town.1150
> hams.. and only 4 of us on HF.   City hall wants my  license revoked
> permanently.
> I made page 1 of the local paper about 6 x now.  The only ham that I know
> who got
> busted for high power was old Tommy Wong, VE7BC [ big cookie]  who got
> nailed
> for running 5 kw AM... back at the tail end of the AM days.
>
> ## This monday, the battle over city hall not granting me a building permit
> for my new
> tower starts up.  Hams are exempt from building permits, both provincially,
> and federally...
> but city hall insists that I spend thousands on a local engineer,  to make
> sure my new
> tower is safe.  Stay tuned.    I have had lawyers working on my behalf
>  since 1998.
>
> ##  I had  3 x radio inspector's  come over, in 2 x vehicles at 9AM on a
> Sat morning
> of a dx contest. [ on double time too, plus hotels  from the night before]
>   I had had 1 hr
> of sleep.  They came in under false pretenses, stuck the spectrum analyzer
> on the radio
> etc.    To come over now, they require a court order  from a fed judge,
> that specifies the
> use of force, by a peace officer.  And I'm still not required to open the
> door.  They also
> require  exigent circumstances, like spurs  wiping out an aircraft
> navigation system, or
>  a modified 2m xcvr,  TX'ing out of band, on the local cops freq etc...
> something actually
> legit.
>
> ##  So  Bill,  are you the only one who has the right to free speech ?
> There is almost 600
> of us on the yahoo amp reflector.... how come you left ?    Where's my
>  $1000.00 ??  Would
> you like to bet another $1000.00 cash that RF won't pass through 1/8" thick
>  AL plate.
>
> Jim  VE7RF
>
>
>
>
> 73, Bill W6WRT
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>