Radio WC6W wrote:
> A power FET or an IGBT (with an internal or external diode) should do for
> that spot rather than an old bipolar device.
> At least a 600V device would be indicated.
> 600V IGBT's have become very economical.
I recommend taking the horizontal output transistor out of an old NTSC
(analog) TV set.
They are about 1,200 Volts at 6 or 7 amps, heat sunk. A single hi Voltage
(Video output transistor)
inverter and you are ready to design. Much cheaper!
--
Ron KA4INM - The next election, I know what is going to happen, I'm going
to help.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|