> How do you get the tarnish off of miniductor or airdux-type coils wound
> with tinned wire?
> It's hard to get steel wool in between the turns!
Steel Wool should never be used on wood or anything that you try to "pretty
up" because
you will put micro-slivers of steel in your project that will eventually rust
and turn
brown, even under varnish. "Scotch-brite" is an abrasive plastic pad that is
effective
and does not have the above drawback.
--
Ron KA4INM - The next election, I know what is going to happen, I'm going
to help.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|