>> How do you get the tarnish off of miniductor or airdux-type coils wound
>> with tinned wire?
> The problem is keeping it looking fresh without affecting performance. Maybe
> a very light coat of clear acrylic if the RF doesn't get them too warm.
> If your'e real talented maybe a fast dip in a solder pot after cleaning or
> even silver plating.
I think part of the problem with these coils is frequently the thin tin
coating is
scratched and rubbed off. (copper shows through) A real good cleaning followed
by one of
the "cold tin" platings would restore the original look. (lacking a silver
coating)
--
Ron KA4INM - The next election, I know what is going to happen, I'm going
to help.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|