Try sticking to the 3-500Z and the service in the discussion Lou.
You might also want to look at the 3-500Z Eimac specs at the Absolute
Maximum Ip rating for Class B linear service.
And at some point put an AL-80 on an SA and look at the IMD when operated
full bore. It aint pretty.
Carl
------------
In a message dated 5/23/2010 11:16:53 A.M. Eastern Daylight Time,
km1h@jeremy.mv.com writes:
At 2700V @ 400 ma it doesnt matter if its CCS or not
Carl, how do you account for a pulse rating on a tube? For a 3cpx1500a7 tube
the plate current is 50AMPS and the Anode V is 10KV and the output power is
306KW!! Is it not a Po vs time?
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|