Amps
[Top] [All Lists]

Re: [Amps] Salt water load

To: "Jim Thomson" <jim.thom@telus.net>, <amps@contesting.com>
Subject: Re: [Amps] Salt water load
From: "David Cutter" <d.cutter@ntlworld.com>
Date: Sun, 18 Jul 2010 17:02:32 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I read somewhere that salty string works as an antenna, so, if you forgot 
your real antenna for the dxpedition...

David
G3UNA
>
> Reminds me of the April article in QST many years ago. The fellow dug
> a trench, filled it water and used for a reflector, I believe it was.
>
> 73, Bill W6WRT
>
> ## The joke's on you Bill.  The salt water loads actually work.  I just
> built one using a glass container.   Dead flat on the mfj on 10m.
>
> ##  I will try another one.. in a metal container, which just a single
> probe, dead center, sticking straight down into the salt water... but
> not touching the bottom.
>
> ## If the guy had used salt water in the trench, it might just have worked 
> !
> No trench, how about a pvc pipe full of salt water ..and end caps ?
>
> Jim    VE7RF
> 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>