Good question too! I guess the fundamental question is why did Ten Tec select
90 CFM fan instead of 250 CFM.
Rudy N2WQ
--- On Mon, 8/16/10, Mike & Becca Krzystyniak <k9mk@flash.net> wrote:
From: Mike & Becca Krzystyniak <k9mk@flash.net>
Subject: RE: [Amps] Can I cool too much the tubes?
To: "'Charles Harpole'" <k4vud@hotmail.com>, k7fm@teleport.com,
r_bakalov@yahoo.com, amps@contesting.com
Date: Monday, August 16, 2010, 1:09 PM
If you put too much air around a tube, won't the aerodynamics of the
convection structure come into play creating votexes and/or diversion of or
an uneven airflow past select surface area that needs air flowing over it?
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Charles Harpole
Sent: Monday, August 16, 2010 12:02 PM
To: k7fm@teleport.com; r_bakalov@yahoo.com; amps@contesting.com
Subject: Re: [Amps] Can I cool too much the tubes?
"You can't put too much air flow on a tube."
Now, does that mean, you can put too much air on a tube?
Or does it mean, you can put huge amounts of air on a tube?
Reply off net to protect the delicate.
Charles Harpole k4vud@hotmail.com
> From: k7fm@teleport.com
> To: r_bakalov@yahoo.com; amps@contesting.com
> Date: Mon, 16 Aug 2010 07:08:57 -0700
> Subject: Re: [Amps] Can I cool too much the tubes?
>
> Is there a risk of running the tubes too cool if I have a much higher air
> flow?
>
>
> You would suck (or blow) the tubes out of their socket before you cooled
> them too much.
>
> Air is your friend. Plenty of air is your better friend.
>
> 73, Colin K7FM
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|