Amps
[Top] [All Lists]

Re: [Amps] SB220 tune capacitor

To: amps@contesting.com, "hs0zed@csloxinfo.com >> Martin Sole" <hs0zed@csloxinfo.com>
Subject: Re: [Amps] SB220 tune capacitor
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Mon, 18 Oct 2010 22:21:45 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
 > Did the tune capacitor change during the life of the SB220 or
 > perhaps with similar amplifiers? SB200 HL220 etc.

Yes, later SB220 had a higher voltage breakdown (wider space,
more plates) capacitor that was longer.  It generally came with
a special end bracket for mounting the 10 meter coil.

73,

    ... Joe, W4TV

On 10/18/2010 10:07 PM, Martin Sole wrote:
> Perhaps a question for the Heathkit history buffs.
>
>
>
> Did the tune capacitor change during the life of the SB220 or perhaps with
> similar amplifiers? SB200 HL220 etc.
>
>
>
> I have received a replacement capacitor, well it's in UK awaiting onward
> shipment. From a picture of the actual part sent to me it appears to have
> two differences with the original part, these being that the ceramic
> insulators are mounted outboard of the aluminium end plates whereas on the
> original they are inboard and secondly that the number of fixed / moving
> vanes is 21/22 as opposed to 18/19 on the original part. I am awaiting
> confirmation of mounting hole spacing which might be the most significant
> issue, assuming the min C is not now too high.
>
>
>
> Any thoughts?
>
>
>
>
>
> Thanks
>
> Martin, HS0ZED
>
>
>
>
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>