3 x 3cx800s will do a LOT of Pout.
Command's does near 6 Kw.
The 3CX800 has a pair of datasheets running around. One shows Pout > 1200
watts, another shows it at 750.
3 800s doing 4Kw is only 1300 watts a tube.... Easily accomplished, it's
only 1.5 times Pdiss.
3 x 800s = 2400 watts of diss. 3 X 4-400s = 1200 watts of Pdiss. I'm not
a math major, but I fail to see how 1200 = 2400??????
--Shane
KD6VXI
On Tue, 23 Nov 2010 07:58:41 -0800, DJ7WW <dj7ww@t-online.de> wrote:
> Only if the tube specifications are far exceeded.
> 3x 4-400 will do the same then.
>
> 73
> Peter
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Carl
>
> I just serviced a LK-800C and discovered 6-32 steel hardware in the RF
> path
> on both sides of the plate blocking cap. One side was darkened overall
> and
> the other was black where the threads entered the cap, it looked like
> rust
> under magnification. This amp will do an easy 3500-4000W + with
> sufficient
> drive.
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
--
Using Opera's revolutionary email client: http://www.opera.com/mail/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|