Amps
[Top] [All Lists]

Re: [Amps] Power ALS500M with SMPS (dual 45amp units in parallel)

To: krishna kanakasapapathi <kkanakas@cisco.com>
Subject: Re: [Amps] Power ALS500M with SMPS (dual 45amp units in parallel)
From: "Ulf (SM0NOR)" <ulf@sm0nor.com>
Date: Mon, 31 Jan 2011 17:16:23 +0100
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I'm running that amplifier on two separate Power Supplies. If it is right, I 
don't know. But it works for mer


73's

Ulf (SM0NOR)
ulf@sm0nor.com



On 31 jan 2011, at 16.02, krishna kanakasapapathi wrote:

> Howdie folks,
>  I have a simple question. Is there an issue with powering a ALS500M 
> with dual SMPS(45amp each) in parallel.
>  Any issues with the RF hash? I am about to run out and purchase the 
> SMPS due to the light weight facilitating
> travel. For base station use, i have the trusty old TL-922. I have an 
> opportunity to pick up an Astron 70A for base use
> as well if needed,but pending any shortcomings, am leaning toward the 
> dual SMPS.
> 
> 73s
> krish
> w4vku
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>