Looke really, really nice. The whole build...
Where did you find that extra wafer/switch?
73's
Ulf (SM0NOR)
ulf@sm0nor.com
On 31 jan 2011, at 15.59, Jim W7RY wrote:
> Take a look at the photos of my amplifiers. This is how I did the exact
> system you are talking about.
>
> http://s900.photobucket.com/albums/ac206/w7ry/
>
> 73
> Jim W7RY
>
>
>
> --------------------------------------------------
> From: "Ulf (SM0NOR)" <ulf@sm0nor.com>
> Sent: Sunday, January 30, 2011 11:51 PM
> To: "Amps reflector" <amps@contesting.com>
> Subject: [Amps] looking for idea on switching arrangment
>
>> Hi all,
>>
>> I'm looking for some suggestions on how to switch input together with
>> output. I plan on using relays for the input so mechanical alignment is not
>> a big issue. But I still have to switch DC control voltages. I have a
>> salvaged Centralab band-switch (from an SB230, I think) to which I would
>> like to attach another switch for the control voltages. I thought it would
>> be easy to find an open design switch with a shaft that runs through the
>> switch. But after searching around I came up with nothing. Most modern
>> switches tend to be encapsulated.
>>
>> Suggestions?
>>
>>
>> 73's
>>
>> Ulf (SM0NOR)
>> ulf@sm0nor.com
>>
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>>
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 10.0.1204 / Virus Database: 1435/3413 - Release Date: 01/30/11
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|