Amps
[Top] [All Lists]

Re: [Amps] Al-82 Blowing fuses?

To: amps@contesting.com
Subject: Re: [Amps] Al-82 Blowing fuses?
From: Gary McAdams <g.m.mcadams@comcast.net>
Date: Wed, 23 Feb 2011 21:29:47 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Hello all,

My thread was the one in question, and my AL-82 has not blown a single 
fuse since the last discussion.

It simply quit as strangely as it began. However, during the process I 
did replace both of the original fuses with the same type and rating 
from my  stock. For whatever reason I have not had to do it again and 
that was back in October or November of last year.

73 Gary

On 2/22/2011 8:45 AM, Lee Buller wrote:
> I have the same amp.  A couple of months ago, a thread with the similar 
> problem
> was discussed and "cussed."  It seems to center around the "step-start" relay.
> Ether the contacts need to be "cleaned"...or the resistor is bad....or 
> something
> like that.  You might want to check the archives.  You might also call 
> Ameritron
> and they might be able to help you with parts
>
> Lee - K0WA
>
>

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>