Eddy, I have a couple of those NIB and havent tried them yet. My own
guesstimation is that the graphite anode is around 225-250W PD in SSB
service and 4 dont even show color at 2000W Input....except a long
HooooLahhhhh with the room lights off. A slowed down muffin fan can barely
be heard. With 4 plate modulated and 1200W carrier out they do get a bit red
but not excessively and the fan is moving a lot more air.
At Nearfest last year NIB 813's could be found for $25-30 and $5-10 for
unknown loose ones. Ive had near perfect luck with loose and NOS appearing
which includes no sign of being in a twist lock socket.
At those prices it makes more sense to retrofit a SB-200 than with Ruskie
crap.
Carl
KM1H
----- Original Message -----
From: "Diane & Edward Swynar" <deswynar@xplornet.ca>
To: "Carl" <km1h@jeremy.mv.com>; "Jim Thomson" <jim.thom@telus.net>;
<amps@contesting.com>
Sent: Tuesday, March 29, 2011 1:01 PM
Subject: Re: [Amps] Homebrew is back..
> Hi Carl,
>
> I believe bandwidth limitations are for audio transmissions in general,
> and
> not specific to SSB...
>
> More details surely may be found if you snoop around this Industry Canada
> (our FCC) website:
>
> http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01226.html
>
> ~73~ de Eddy VE3CUI - VE3XZ
>
>
> **********************************************
>
>
>
>
>
> ----- Original Message -----
> From: "Carl" <km1h@jeremy.mv.com>
> To: "Jim Thomson" <jim.thom@telus.net>; <amps@contesting.com>
> Sent: Tuesday, March 29, 2011 10:43 AM
> Subject: Re: [Amps] Homebrew is back..
>
>
>>
>> ----- Original Message -----
>> From: "Jim Thomson" <jim.thom@telus.net>
>> To: <amps@contesting.com>
>> Sent: Tuesday, March 29, 2011 10:51 AM
>> Subject: Re: [Amps] Homebrew is back..
>>
>>
>> >
>> >
>> > Subject: RE: [Amps] Homebrew is back..
>> >
>> >> Dang-it guys. Just when I was starting to be satisfied with SSB you
>> >> had
>> >> to
>> >> go and make me think about nice, big, plate modulated AM audio again.
>> >> That
>> >> is going to cost me. It takes me back to many winter nights in a very
>> >> warm
>> >> room listening to such nice audio and wonderful smell of transmitter.
>> >>
>> >> Sam, N9FUT
>> >
>> > &&&& And you can easily get nice sounding audio with 4-6 khz wide
>> > ESSB....and still only
>> > use one half the BW of an AM signal.
>> >
>> > later... Jim VE7RF
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>> I thought SSB BW was limited in Canada?
>> Besides AM can even be copied on a crystal set, that silly ESSB stuff is
>> pretty exclusive.
>>
>> Carl
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|