On 4/14/2011 7:56 PM, Bill Smith wrote:
> I plan on using a roller inductor with two GI-46B tubes in the old Swan Mark
> 1. Is the edge wound the one I should use? How many amps should it be rated
> for?
I don't know if the base is the same as the GI-7B but it might be. Check
the sizes and if they are, there is a guy who makes sockets for them on
e-bay. You can mount them without sockets but they do need air for
axial cooling...unless you change the cooler to one that works with
transverse cooling.
73
Roger (K8RI)
> 73,
> Bill Smith KO4NR
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|