This reminds me of an event during the June VHF Contest. The 432 Station running
about 800W quit. It used a DIN 7/16 on the GS-35b amp with a DIN to N adapter.
We debugged it to the an open circuit in the adapter. On dismantling the adapter
it had a very small pin, about the same diameter as 18 to 20 gauge wire that
connected between the larger pins for the N and DIN sides. This adapter was one
of hundreds that became surplus from the cellular industry.
Also, I once picked up a bag full of what I thought were a very weird silver
plated N Female to F female adapters. But after looking at the burned N to DIN
adapter, it now seems like some company made a series of between series adapters
that could screw together with what looks like F series threads and use an RG-59
sized center pin.
Watch out.
jeff, wa1hco
On 04/24/2011 08:39 AM, Carl wrote:
> I havent dared run my big 432 amp close to that level yet until all the feed
> line and antenna connectors are upgraded.
>
> Carl
> KM1H
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|