Hey Boys and Girls,
I just picked up a used 811. I was told it was tested prior to me picking
it up with no problems. After a 150 mile car ride the amp will not
transmit. I have 1700 volts on the plate and when I key up the rig I get
nothing. No transmit light and no chnage in the meters on the amp. The rig
is good and putting out as it should.
I only have the coax going from the rig to the amp and the coax going out to
the antenna.
Any help would be really appreciated!
Steve
N2MAI
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|