I for one would like to hear more about your project. I'm a big fan of the
4-1000A.
73
Bill wa4lav
________________________________________
From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf Of
Allan Greening [vk3pa@vk3pa.com]
Sent: Saturday, June 25, 2011 2:57 AM
To: amps@contesting.com
Subject: [Amps] 4/1000A Ques.
Wot screen voltage should I run with 5Kv on the plate in class "C" for a
"CW" only amp,
also wot bias voltage on the control grid ? Tube is grid driven.
Any idea wot drive power to drive the tube to full output?
Tu de VK3PA
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|