On 6/25/2011 8:33 PM, Fuqua, Bill L wrote:
> I for one would like to hear more about your project. I'm a big fan of the
> 4-1000A.
Me too. I picked up a pair of 1them that had been tested last week end
at a good price. One of the guys I used to work with had them as spares
for his amp. Wish I had the PS he used. Transformer was single phase
220 in with roughly 6000 at 2A CCS . I had one of them at one time and
then gave up on building about 30 years ago. Now I'm back at it.
73
Roger (K8RI)
> 73
> Bill wa4lav
>
> ________________________________________
> From: amps-bounces@contesting.com [amps-bounces@contesting.com] On Behalf Of
> Allan Greening [vk3pa@vk3pa.com]
> Sent: Saturday, June 25, 2011 2:57 AM
> To: amps@contesting.com
> Subject: [Amps] 4/1000A Ques.
>
> Wot screen voltage should I run with 5Kv on the plate in class "C" for a
> "CW" only amp,
> also wot bias voltage on the control grid ? Tube is grid driven.
> Any idea wot drive power to drive the tube to full output?
> Tu de VK3PA
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|